Abstract Objective: To compare porcelain and metal repair done with both nanocomposite and conventional composite. Material and Methods: A total of 30 cylinders were fabricated from Porcelain (I), Porcelain fused to metal (II), and metal (III) substrate each. Control group (A) was bonded with conventional micro-hybrid composite and experimental group (B) was bonded with nanocomposite in a 2 mm thickness. All specimens were thermocycled and stored in distilled water at 37 °C for 7 days. A universal testing machine was used to measure the Shear bond strength (SBS). The difference between bond strengths of the groups was compared using an independent t-test. Results: In all three groups, the SBS was higher in the experimental group as compared to the control group. The use of nanocomposite of metal alloy presented maximum shear bond strength, followed by samples of porcelain fused to metal and finally porcelain, showing the lowest values of SBS. Conclusion: Porcelain and alloys bonded with nanocomposite exhibit enhanced adhesiveness as well as aesthetic and mechanical properties. This subsequently would translate into providing higher clinical serviceability and durability and hence a cost-effective and accessible repair option for human welfare.

SUMMARY OBJECTIVES: This study aimed to develop artificial intelligence and machine learning-based models to predict alterations in liver enzymes from the exposure of low annual average effective doses in radiology and nuclear medicine personnel of Institute of Nuclear Medicine and Oncology Hospital. METHODS: Ninety workers from the Radiology and Nuclear Medicine departments were included. A high-capacity thermoluminescent was used for annual average effective radiation dose measurements. The liver function tests were conducted for all subjects and controls. Three supervised learning models (multilayer precentron; logistic regression; and random forest) were applied and cross-validated to predict any alteration in liver enzymes. The t-test was applied to see if subjects and controls were significantly different in liver function tests. RESULTS: The annual average effective doses were in the range of 0.07–1.15 mSv. Alanine transaminase was 50% high and aspartate transaminase was 20% high in radiation workers. There existed a significant difference (p=0.0008) in Alanine-aminotransferase between radiation-exposed and radiation-unexposed workers. Random forest model achieved 90–96.6% accuracies in Alanine-aminotransferase and Aspartate-aminotransferase predictions. The second best classifier model was the Multilayer perceptron (65.5–80% accuracies). CONCLUSION: As there is a need of regular monitoring of hepatic function in radiation-exposed people, our artificial intelligence-based predicting model random forest is proved accurate in prediagnosing alterations in liver enzymes.

Abstract Background: Palyno-morphological and foliar epidermal studies plays a very important role in the correct identification and differentiation of two weeds of genus convolvulus. Objective: The aim of the study is to determine the medicinal uses of the two important weeds for correct systematic identification. Methods: Both the qualitative and quantitative features were measured with the help of Light microscopy (LM) and scanning electron microscope (SEM). Results: Variations were observed in both the weeds, i.e Convolvulus arvensis (bindweeds) and Convolvulus prostatus (soft bindweed) in epidermal cells, stomatal size and number, guard cell shape and size, subsidiary cell and diversity of trichomes. Paracytic type of stomata was found in both the weed species. Stomata shape in Convolvulus arvensis is elliptical and oval to oval oblong in Convolvulus prostratus. Weed species have a difference in size, shape, polarity and exine ornamentation. Tricolporate pollen type was observed. The shape of pollen grains is Prolate, Perforate. By using these Palyno-morphological characteristics a taxonomic key is prepared for the identification of these weed plants. Conclusions: High fertility rate i.e Convolvulus arvensis 96% and in Convolvulus prostatus is 90 % shows the weed species are well adapted in the area. Systematics studies of the weed play a very important role not only incorrect identification but also differentiation with other weed plants and subsequently for the conservation purposes.

Abstract The research article is based on biodiesel synthesis by the transesterification of waste cooking oil with methanol in the presence of heterogeneous catalysts prepared from different marble. Eight samples of marble were successfully converted into potential catalysts by calcination. The thermal treatment of waste marbles at 300oC-1000oC converted the metal carbonates (CaCO3) to metal oxides (CaO). The calcined marble was analyzed by chemical tests, flame atomic absorption spectroscopy (FAAS), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction studies (XRD). The presence of CaO in these catalysts made them highly reactive for biodiesel synthesis. The basicity and percentage of calcium in marble catalysts were calculated to know their basic strength. The transesterification was performed by fast stirring using waste cooking oil, methanol and nine different types of marble catalysts for 5 min at five different conditions, i.e., room temperature, hot plate stirring, solar ordinary irradiations, solar concentrated reflected irradiations and solar concentrated refracted irradiations. The solid catalysts were easily separated from the product for re-use. All marble catalysts were found to be active and basic except one namely silver pun (I). The production of biodiesel was confirmed by ASTM standards, TLC examination and by gas chromatography (GC).

Abstract A natural and biocompatible fibrin microsphere is one of the most promising dual delivery vehicle as compared to other traditionally designed delivery modalities. It represents sustained delivery of encapsulated drug and is easily biodegradable in the blood circulation. In the present study, we evaluated the systemic augmentation of the antifungal activity of amphotericin B loaded in fibrin microsphere (AMB-fibrin microsphere) against cryptococcosis in Swiss albino mice. Mice infected with Cryptococcus neoformans were treated with 0.5 mg/kg AMB-fibrin microsphere that was given alternately for 7 days. The antifungal potential of AMB-fibrin microsphere was assessed on the basis of reduction of cfu count in the systemic circulation and various vital organs of infected mice. The formulation was found to be highly effective in reducing intracellular pathogen from the experimental animals where fibrin microsphere significantly controlled the release of amphotericin B for longer time duration. The AMB-fibrin microsphere chemotherapy was significantly more effective than free amphotericin B in reducing the fungal burden and showed better survival efficacy (p < 0.05). The current study demonstrating the use of novel amphotericin B loaded fibrin microsphere not only imparts protection to the encapsulated amphotericin B but also offers an effective strategy to decrease the drug associated toxicities.

Background: Endophytic bacteria are ubiquitous in all plant species contributing in host plant's nutrient uptake and helping the host to improve its growth. Moringa peregrina which is a medicinal plant, growing in arid region of Arabia, was assessed for the presence of endophytic bacterial strains. Results: PCR amplification and sequencing of 16S rRNA of bacterial endophytes revealed the 5 endophytic bacteria, in which 2 strains were from Sphingomonas sp.; 2 strains from Bacillus sp. and 1 from Methylobacterium genus. Among the endophytic bacterial strains, a strain of Bacillus subtilis LK14 has shown significant prospects in phosphate solubilization (clearing zone of 56.71 mm after 5 d), ACC deaminase (448.3 ± 2.91 nM α-ketobutyrate mg-1 h-1) and acid phosphatase activity (8.4 ± 1.2 nM mg-1 min-1). The endophytic bacteria were also assessed for their potential to produce indole-3-acetic acid (IAA). Among isolated strains, the initial spectrophotometry analysis showed significantly higher IAA production by Bacillus subtilis LK14. The diurnal production of IAA was quantified using multiple reactions monitoring method in UPLC/MS-MS. The analysis showed that LK14 produced the highest (8.7 uM) IAA on 14th d of growth. Looking at LK14 potentials, it was applied to Solanum lycopersicum, where it significantly increased the shoot and root biomass and chlorophyll (a and b) contents as compared to control plants. Conclusion: The study concludes that using endophytic bacterial strains can be bio-prospective for plant growth promotion, which might be an ideal strategy for improving growth of crops in marginal lands.

This article demonstrates the new approaches for the generation of bioelectricity from waste citrus fruit using direct a galvanic cell (DGC), an indirect galvanic cell (IDGC), a conventional fuel cell (CFC) and a microbial fuel cell (MFC). The citrus fruit was used as whole for the preparation of DGC and their juices for the preparation of IDGC, CFC and MFC. The performance and bioelectrical parameters obtained were compared. The voltage found to be increased by increasing the number of cells in a series while, the current remains constant. Whereas the voltage remains constant and the current found to be increased with increasing the number of cells in parallel sequence. The power output of three units of citrus fruit connected together in a series found to be sufficient to turn on the LED light bulb in all cases. The result showed that lemons have the maximum power output by the DGC and MFC method, whereas grapefruit showed the maximum power output by IDGC, and thus considered as the best citrus fruit. Addition of NaCl solution in DGC and IDGC slightly increased the values of power output. The power output of citrus fruit was also determined by CFC and MFC before and after the inoculation of Escherichia coli. The detailed microscopic analysis of all the samples was carried out. It is found that all MFCs have higher power output as compared to their counterpart CFCs. However, maximum power output was displayed by DGCs. Moreover, a lemon fuel cell has the higher power output as compared to the fuel cells of other citrus fruit. This approach can be used to overcome the disadvantages of many non-renewable and conventional sources of energy including burning of fossil fuels to mitigate the major source of global warming and pollution by using such biodegradable and renewable sources.

A discharge of nitrogen - hydrogen mixture by 50 Hz pulsed dc in the presence of active screen cage is investigated by optical emission spectroscopy (OES). The aim is to identify the parameters (mixture ratio, filling pressure and current density) that may lead to high concentration of active species (N2, N2+ and N). The maximum concentration in this experiment is found with 40% H2 - 60% N2, at filling pressure of 3 mbar with current density of 5 mAcm-2. High carbon steel samples are nitrided for 1 - 4 hours at 500ºC and the treated samples are characterized by X - ray diffraction (XRD), Raman spectroscopy and Vicker's micro - hardness testing. The XRD spectra show different phases of nitrides (Fe2 - 3N, FeN, CrN) along with iron oxides. The Raman spectra confirm the formation of α - β (C3N4). The surface hardness is found to increase up to six times for 2 hour treatment.

In this study, a variety of samples were screened for the presence of PHA synthase gene. Results showed that 16 out of 102 isolated were positive for PHA respective genes. The highest prevalence was observed in Pseudomonas aeruginosa. The capability of PHA production was also shown by growing these strains on the defined medium and subsequent analysis using intracellular granules staining and Fourier transform infrared spectroscopy (FT-IR). The microscopic analysis showed that the positive strains accumulated PHA in the cell. The FT-IR analysis showed the presence of PHA peaks in the dried cells as well as in extraction product. P aeruginosa strain P7 showed higher concentration of PHA compared to the others as demonstrated by the highest respective peaks in FT-IR.

OBJETIVO: Estudar a diferença de dor, estalido e crepitação patelofemoral no pós-operatório em pacientes com ou sem recapeamento patelar após 5 anos, os quais tinham dor patelofemoral antes da cirurgia. Estudar a incidência de dor, estalido e crepitação patelofemoral depois de pateloplastia em ambos os grupos. MÉTODOS: Revisão retrospectiva de 765 pacientes submetidos a artroplastia total do joelho (ATJ) com ou sem recapeamento patelar. Os pacientes foram perguntados sobre dor pré e pós-operatória, 5 anos depois da cirurgia. Foram examinados por enfermeiro especializado 5 anos, após a cirurgia para verificar estalidos ou crepitação patelofemoral (PF). RESULTADOS: 688 pacientes (89,9%) tinham dor PF pré-operatória. De 688 pacientes, 449 tinham recapeamento patelar (R) e 239 não tinham (NR). Trinta e seis pacientes do grupo NR tinham pateloplastia. A incidência de dor PF pós-operatória foi 13,3% no grupo R e 13,6% no grupo NR. A incidência de estalido PF pós-operatório no grupo R foi 10,4% e apenas 1,3% no grupo NR (estatisticamente significante, p < 0,005 comparado com o grupo R. CONCLUSÃO: Nos pacientes com dor PF pré-operatória, houve incidência significantemente maior (p< 0,005) de estalido pós-operatório no grupo R. Nos pacientes sem dor PF antes da cirurgia, verificou-se incidência significantemente maior (p <0,005) de crepitação pós-operatória no grupo R. Nos pacientes com ou sem dor PF pré-operatória, a incidência de dor, estalido e crepitação PF pós-operatória foi menor que nos pacientes submetidos a pateloplastia, em comparação com outros membros do grupo NR (estatisticamente significante, p<0,005). Nível de evidência Tipo 4, Série de casos.

OBJECTIVE: To study the difference of post-op patellofemoral pain, clunk and crepitus in patients with/without resurfacing at 5 years who had pre-op patellofemoral pain. To study the incidence of post-operative patellofemoral pain, clunk and crepitus following patelloplasty in both the groups. METHODS: Retrospective review of 765 patients who had total knee replacement with/without resurfacing.Patients were asked about both pre-operative pain and also post-operative pain 5 years after the operation. Patients were examined by a specialist nurse at 5 years post-operatively to check for any patellofemoral clunk/crepitus. RESULTS: 688 patients (89.9%) had preoperative PF pain. Of 688 patients, 449 had patellar resurfacing and 239 had not (NR). Thirty-six patients from the NR group had patelloplasty. The incidence of postoperative PF pain was 13.3% in the R group and 13.6% in the NR group. The incidence of postoperative PF clunk in was 10.4% in the R group and only 1.3% in the NR group (statistically significant, p < 0.005 compared to the R group). CONCLUSION: In patients with pre-op PF pain, there is significant (p<0.005) higher incidence of post-op clunk in the R group. In patients without pre-op PF pain, there is significantly (p<0.005) higher incidence of post-op crepitus in the R group. In patients with/without pre-op PF pain, the incidence of post-op PF pain, clunk and crepitus is lower than in patients who underwent patelloplasty when compared to the other members of the NR group (statistically significant p<0.005). Level of Evidence Type 4, Case Series.

The present paper is a study of triple generating functions of Jacobi polynomials of two variables.